Home
About
Products
Contact
Products
»  CLASSIC
»  WETLOOK
»  SUPERWHITE
»  OPAQUE
»  EMBOSS
»  ECCO MIGHTY
»  ATHLETIC
»  ATHLETIC
    GLAZE
»  MICA
»  SPARKLING
»  AQUASOFT
»  DYE SERIES
»  X-CHARGE
»  DISCHARGE
»  CRACKLE
»  PIGMENTS
»  TULCRAFT
»  TULETCH
»  TULJET
»  TULSTAR
»  TULTEX
»  PHOTO &
    EMULSIONS
»  AUXILIARIES
    & SUPPLIES
Binder SG A pure acrylic emulsion binder with a high solid (45%) content. It has a soft, non-tacky handle with high fastness properties.
Emulsifier TW A stock paste prepared by emulsifying oil in water. Contains a high solid base for long lasting stability.
Fixer UR & UX A self curing additive that allows the inks to cure within 72 hours without heat curing. Although heat is not required, curing at 150°C for 15 seconds or more will result in a reduced setting time.
HLT Thickener For thickening water-based inks. Used for minor viscosity adjustments.
Photo Hardener Enhances the water resistance of the emulsion on the screen.
Stripper A fast acting photo emulsion remover without Photo Hardener.
Screen Opener MC - a milder solution recommended for mask-cut films.
SB - a stronger solution recommended for photo emulsion.
Gloss Lacquer Solvent-based screen filler for unwanted holes on the screen coated with Photo Emulsion Local, Photo Emulsion SP-SOL (Diazo-type) or Photo Emulsion TXR.
Film Adhesol Solvent for attaching mask-cut films onto the screen.
Table Adhesive NP A sticky paste used to temporarily fasten fabric material on the printing table / plate. Environmentally friendly and non-pthalate. Won't stick to fabric after use.
Vinyl Reducer Solvent for adjusting the viscosity of solvent based inks.
Vinyl Retarder Solvent for prolonging ink drying time in the screen over extended periods of time. Reduces clogigng on very fine mesh screens.
TULSTAR NB
Catalyst
Improves adhesion of NB Series nylon inks. (Recommended dosage 1-10% depending on substrate)
Ergo Aluminum
Squeegee Handle
Made of light weight aluminum and ergonomically designed for maximum comfort.
Polyurethane
Squeegee
A high quality flat edge blade for all purpose printing. For use with ergo aluminum squeegee handle.
  • 70 and 75 durometer recommended for water based inks (8mm x 45mm).
  • 85 durometer recommended for solvent and plastisol inks (9mm x 50mm).
Tulstrip Green Film
Solvent-adhering hand-cut stencil film.
  • Use for water-based textile inks.
  • Thicker membrane for easy adhesion on screen mesh.
  • Selected green color that is easy on the eyes and for tracing.
You are visitor number: Website Hit Counters